Configuring Tcp/Ip; Using Setip Program - Samsung ML-3470 Series User Manual

Configuring TCP/IP

Your printer can be set up with a variety of TCP/IP network information,
such as an IP address, a subnet mask, a gateway, and DNS addresses.
There are several ways in which your printer can be assigned a TCP/IP
address, depending on your network.
• Static addressing: A TCP/IP address is assigned manually by the
system administrator.
• Dynamic addressing via BOOTP/DHCP (default): A TCP/IP address
is assigned automatically by the server.
Note
Before configuring TCP/IP, you need to set the network
protocol to TCP/IP.
Static addressing
To enter a TCP/IP address from your printer's control panel, take the
following step:
Press Menu until Network appears on the bottom line of the
1
display and press OK.
Press OK when TCP/IP appears.
2
Press the scroll buttons until Static appears and press OK.
3
Press OK when IP Address appears.
4
Set the first byte between 0 and 255 using the scroll buttons and
5
press OK to move to the next byte.
Repeat this to complete the address from the 1st byte to the 4th
byte.
When you have finished, press OK.
6
Repeat step 5 and 6 to configure the other TCP/IP parameters:
7
subnet mask and gateway address.
Press Stop to return to Standby mode.
8
Dynamic addressing (BOOTP/DHCP)
To have a TCP/IP address assigned automatically by the server, take the
following step:
Press Menu until Network appears on the bottom line of the
1
display.
Press OK when TCP/IP appears.
2
Press the scroll buttons until DHCP or BOOTP appears and press
3
OK.
Press Stop to return to Standby mode.
4

Using SetIP program

This program is for the network IP setting using the MAC address which
is the hardware serial number of the network printer card or interface.
Especially, it is for the network administrator to set several network IPs
at the same time.
Insert the driver CD provided along with your machine.
1
Start Windows Explorer and open the X drive. (X represents your
2
CD-ROM drive.)
Double click Application > SetIP.
3
Open the language folder you want to use.
4
Double click Setup.exe to install this program.
5
From the Windows Start menu, select Programs > Samsung
6
Network Printer Utilities > SetIP.
Select the name of your printer and click "
7
Note
If you cannot find your printer name click "
list.
Enter the network card's MAC address, IP address, subnet mask,
8
default gateway, and then click Apply.
Note
If you do not know the network card's MAC address, print the
machine's network information report.
Click OK to confirm the settings.
9
10 Click Exit to close the SetIP program.
Note
If you are in a non-static IP address environment and need to
setup a DHCP network protocol, go to the http://
developer.apple.com/networking/bonjour/download/,
select the program Bonjour for Windows due to your
computer operating system, and install the program. This
program will allow you to fix the network parameter
automatically. Follow the instruction in the installation window.
This program does not support Linux.
4.2
<Network setup(ML-3471ND only)>
".
" to refresh the