Firebox Parts; Brick Removal & Replacement; Combustor Removal & Replacement - Travis Industries Arbor Owner's Manual

Firebox Parts

Apply penetrating oil (WD40) to the bolts
prior to removal to prevent stripping.
7
1
ID # Description
1 Side Brick
3 Inter-Ram Gasket
5 Back Brick
7 Brick Retainers with Bolts
9 Push Plugs (pack of 4)
Brick Removal & Replacement
Do not pry brick - they chip and crack easily. Remove the clips holding the side brick in place.
Remove the side brick. Remove the clip holding the back brick in place. Lift the back brick up and
remove. Remove the gasket on top of the combustion brick. Remove the combustion brick.
Combustor Removal & Replacement
Remove the bricks first. Remove the four (4) screws holding the firebox back in place. Remove the
firebox back. Slide the combustor forward, taking care not to damage this component.
© Travis Industries
Maintaining Your Appliance
7
3
2
4
Qty Part #
2 250-00139
1 250-00294
1 250-00140
1 250-00144
2 92-1360
100-01190_003
6
5
1
ID # Description
2 Combustion Brick w 2 Gaskets
4 Combustion Brick Gasket
6 Firebox Back w 4 Nuts & Bolts
8 Combustor Pack with Gaskets
8
9
This nut is located on
the exterior of the stove
beneath the rear heat
shield.
Qty
1
1
1
1
4100818
35
Part #
250-00141
250-00145
250-00704
250-00247