Honda CRF250R Owner's Manual page 112

21.Clean the threads of the fork protector bolts
(18) and axle holder thoroughly.
Apply locking agent to the bolt threads.
Install the fork protectors (19), fork protector
bolts and brake hose clamp bolts (20).
Tighten the fork protector bolts to the
specified torque:
5.2 Ibf·ft (7 N·m, 0.7 kgf·m)
22.Align the brake caliper (21) and hose with the
left fork leg, making sure that the brake hose
is not twisted. An improperly routed brake
hose may rupture and cause a loss of braking
efficiency.
23.Clean the threads of the caliper mounting
bolts (22) and brake caliper thoroughly.
Apply locking agent to the bolt threads.
Install the brake caliper on the slider and
tighten the caliper mounting bolts to the
specified torque:
22 Ibf·ft (30 N·m, 3.1 kgf·m)
(19)
(18)
(18)
(18) fork protector bolts
(19) fork protectors
(20) brake hose clamp bolts
(21) brake caliper
(22) caliper mounting bolts
24.Clean the surfaces where the axle and axle
clamps contact each other.
Install the left and right side collars into the
wheel hub. Insert the front axle shaft through
the wheel hub from the right side. Make sure
the front axle shaft is seated firmly onto the
left fork leg clamp inner surface.
Tighten the front axle nut (23) to the specified
torque:
65 Ibf·ft (88 N·m, 9.0 kgf·m)
Tighten the left axle pinch bolts (24) to the
specified torque:
15 Ibf·ft (20 N·m, 2.0 kgf·m)
(20)
(23) front axle nut
(24) left axle pinch bolts
(21)
(22)
Front Suspension Adjustments
Fit the brake caliper (21) over the disc, taking
care not to damage the brake pads.
(24)
(21) brake caliper
(23)
(21)
(cont'd)
107
Adjustments for Competition