Wall Mount Installation
Pull the handset hook out of the base and reverse its position so that the
Step 1:
hook points up and will hold the handset when you hang up.
Pull the ends of the phone cord to untangle the cord; run the cord
Step 2:
through the groove on the back of the phone. Insert the tabs of the
mounting bracket into the slots in the back of the phone. Push the
mounting bracket in and down firmly until it snaps into place. (
4)
Plug the flat telephone line cord into the wall plate jack, then align the
Step 3:
mounting bracket's keyhole slots with the wall plate studs and slide the
base of the phone downward to secure it on the wall.
(Figure 4)
16
INSTALLATION
(Figure 3)
F
FLASH
M1
R
REDIAL
M2
P
PAUSE
M3
M
F
FLASH
M6
M1
R
REDIAL
M7
M2
P
PAUSE
M8
M3
M
(Figure 5)
(See Figure 3)
See Figure
(See Figure 5)