DeWalt DW818 Instruction Manual page 9
Hide thumbs
Also See for DW818:
- Instruction manual (34 pages) ,
- Instruction manual (36 pages) ,
- Manual (88 pages)
Advertisement
Available languages
Available languages
Package contents
The package contains:
1 Angle grinder
1 Guard
1 Side handle
1 Flange set
1 Two-pin spanner
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your angle grinder has been designed for
professional grinding and cutting applications.
1 On/off switch
2 Spindle lock
3 Guard
4 Side handle
Electrical safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your DEWALT tool is double insulated in
accordance with EN 50144; therefore no
earth wire is required.
Using an extension cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
tool (see technical data). The minimum conductor
size is 1.5 mm2.
When using a cable reel, always unwind the cable
completely.
Also refer to the table below.
9
Conductor size (mm2)
Cable rating (Amperes)
0.75
6
1.00
10
1.50
15
2.50
20
7.5 15 25 30 45 60
Voltage
Amperes
Cable rating (Amperes)
120
0 - 2.0
6
6
2.1 - 3.4
6
6
3.5 - 5.0
6
6
5.1 - 7.0
10 10 15 20 20 25
7.1 - 12.0
15 15 20 25 25
12.1 - 20.0 20 20 25
220
0 - 2.0
6
6
2.1 - 3.4
6
6
3.5 - 5.0
6
6
5.1 - 7.0
10 10 10 10 15 15
7.1 - 12.0
15 15 15 15 20 20
12.1 - 20.0 20 20 20 20 25
Assembly and adjustment
Prior to assembly and adjustment always
unplug the tool.
Mounting and removing the guard (fig. B)
• Place the angle grinder on a table, spindle up.
• Release the clamping lock (6) and hold the guard
(4) over the tool as shown.
• Align the lugs (7) with the notches (8).
• Press the guard down and rotate it to the
required position.
• If required, increase the clamping force by
tightening the screw (9).
• Tighten the clamping lock.
• To remove the guard, release the clamping lock.
E N G L I S H
Cable length (m)
6
6
6
10
6
6
15 15
10 15 20 20
-
-
-
-
6
6
6
6
6
6
6
6
6
6
10 15
-
Advertisement
