Table of Contents
Advertisement
Overview
❶
Pan Base : control panning angle of camera
Rotate Base : control rotating angle of camera
2
X3.6 Vari-focal Lens Module
3
Rotate Base Holding Screw : fix rotated position
4
5
Pan Base Holding Screws (Color : Silver) : fix panned position
RS-485 Control Cable : The detailed description refers to p14
6
Power Input Jack
Video Output Jack
7
8
Function Setup switch :
9
Display the menu on the screen and move the cursor to four directions to confirm
status or after changing a selected item.
Video Output Terminal to Monitor
❿
⓫
Shield Case
⓬
Dome Cover
Installation
Installation
1) Separate the dome cover by counterclockwise rotation.
2) Separate the shield case by pulling from the camera
body.
Latch
Locking direction
Unlocking direction
(Counterclockwise)
[Figure-1]
* To install the dome cover on the camera body, turn the
latches in locking direction as shown in the figure 1.
10
COLOR DOME CAMERA
Main Body
(Camera)
Shield Case
Locking direction
(Clockwise)
Dome cover
User's Manual
Notes
• T he installation should be done by qualified service personnel or sysytem installers.
• I f the ceiling material is not strong enough to hold the installation screws, the
camera may fall off. Reinforce the ceiling as needed.
When installing on a adapter plate
① Place the bracket provided on the installation
surface and fix it with the M4 tapping screws
(provided).
An arrow for installing directions
(Select either 85X85 or 83.5X46)
adapter plate
② When placing the camera body on the plate,
insert the plate pin into the mounting hole on
the body as shown in figure-1 and fix it by
turning clockwise.
③ When placing the camera body on the plate,
make sure the power and the BNC cables
pass through their respective designated
M4 tapping
holes.(When placing the cable through its
screw (provided)
side, thread it through the hole at the
bottom.)
CAMERA
④ After installation and adjustment of the
camera are complete, secure the dome cover
by turning it clockwise.
Locking
direction
Unlocking
direction
Dome cover
Notes
• P lease locate an arrow on bracket for installing direction that you wish to observe
Area and then fix it with the M4 tapping screws.
11
COLOR DOME CAMERA
Installation
Plate pin
Locking
direction
Unlocking direction
[Figure-1]
User's Manual
Advertisement
Table of Contents
