Problem Troubleshooting - Sirius XM RAdio LH1 User Manual

Home kit
Hide thumbs Also See for LH1:
Table of Contents

Advertisement

Pending Broadcast
System updates are available
Updating

Problem Troubleshooting

Problem
Lynx will not turn on.
I connected Lynx to my computer
to charge the battery, but it does
not charge.
The satellite and/or Internet icon
on the home screen is gray, and I
cannot select it.
I can only tune to channels 0 and
1 on satellite radio.
I don't receive all the satellite
radio channels to which I
subscribed.
You have selected to listen to traffic and weather, but the traffic/weather
for your selected city isn't being broadcast at the moment. Lynx will
automatically tune the traffic and weather when the broadcast begins.
SiriusXM has a system update for Lynx. Tap OK to install the system
update, which will take several minutes, or tap Remind Later to install it
at another time.
When a system update is available, you can install it anytime by tapping
Home
, tap , tap Settings
and tap OK to install the update.
Lynx is applying a software update. Do not power Lynx off until the
updated has completed.
Is the battery installed in Lynx? Lynx will not turn on without the
battery installed. Install the battery.
The battery may be too discharged to power Lynx. Charge the battery,
then trying turning Lynx on.
Lynx will not charge from the computer if it is in any audio playing
mode. It's recommended that Lynx be turned off, or not in any audio
playing mode.
A gray icon indicates that the service is currently unavailable.
For satellite radio, Lynx must be in a powered dock, with the satellite
antenna connected.
For Internet radio, Lynx must be connected to a Wi-Fi network. To
listen, Lynx must also be connected to the SiriusXM Internet radio
service.
Have you already activated your Lynx satellite radio subscription? If
not, refer to
Activate your SiriusXM Satellite Radio
If you have already activated your Lynx satellite radio subscription,
your Lynx may not have received the activation signal. While Lynx is
on and playing satellite radio, go to
and enter the Radio ID of your Lynx. Once you have entered the Radio
ID, the subscription information will be sent to your Lynx within 5
minutes. Lynx will display a Subscription Updated message when it
receives the activation signal.
You can find the Radio ID of your Lynx by tapping Home
Settings
, and tap My Account.
Troubleshooting
, tap About Lynx, tap System update,
Solution
Subscription.
http://www.siriusxm.com/refresh
, tap , tap
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Home kit lh1

Table of Contents