Table of Contents
Advertisement
Installation
2. If you have not yet subscribed your Lynx to satellite radio, Lynx will automatically check the signal strength. If
Signal Found is displayed, tap Continue to proceed with the audio check. If Lynx displays No Signal/Check
Antenna, try repositioning the antenna in a different south facing window, and tap to check the signal
strength again.
If your Lynx is has already been subscribed to satellite radio, tap Home
Lynx, and tap Connection status to display the satellite and terrestrial signal strength. If there is little or no
signal strength, try repositioning the antenna in a different south-facing window.
3. Another easy method is to start at any window, then work from window to window in a simple pattern to find
the window gives the best signal strength. Note that the antenna must also have an unobstructed view, with
no trees or buildings blocking its aim.
4. Once you have found a suitable location for the antenna, route the antenna cable to the Home Dock. Be sure
to avoid any obstructions that could crimp, kink, or twist the cable.
If you were unable to find an indoor location where the antenna could receive a signal, you will need to place it
outdoors instead, facing the south sky. You can also go to www.siriusxm.com for additional help and support for
installing the Indoor/ Outdoor Home Antenna.
10
, tap , tap Settings
, tap About
Advertisement
Table of Contents
