Other Functions; Using The Aux Source; Turning The Clock Display On Or Off; Sound Muting - Pioneer Super Tuner IIID DEH-P5000UB Operation Manual

Section
liD (
Other Functions
Using the AUX source
Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to AUX1
or AUX2.
The relation-
ship between AUX1 and AUX2 sources is ex-
plained below.
About AUX1 and AUX2
There are two methods to connect auxiliary de-
vices to this unit.
AUX1 source:
When connecting auxiliary equipment using a
stereo mini plug cable
• Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX1.
AUX2 source:
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
• Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner's manual.
This auxiliary device is automatically set to
AUX2.
• You can only make this type of connection if
the auxiliary device has RCA outputs.
00
En
)
Selecting AUX as the source
• Press SRC to select AUX as the source.
• If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 27.
Setting the AUX title
The title displayed for the AUX1
or AUX2
source can be changed.
1 After you have selected AUX as the
source, use MULTI-CONTROL and select
FUNCTION to display TITLE INPUT.
2 Enter a title in the same way as the
built-in CD player.
For details concerning operation, refer to
En-
tering disc titles on page
17. (!J
Turning the clock display
on or off
You can turn the clock display on or off.
• Even when the sources are off, the clock
display appears on the display.
• Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.
• The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
(!J
Sound muting
Sound from this unit is muted automatically in
the following cases:
• When a call is made or received using a
cellular telephone connected to this unit.
• When the voice guidance is output from a
Pioneer navigation unit connected to this
unit.
Section
liD (
Other Functions
Using the AUX source
Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to AUX1
or AUX2.
The relation-
ship between AUX1 and AUX2 sources is ex-
plained below.
About AUX1 and AUX2
There are two methods to connect auxiliary de-
vices to this unit.
AUX1 source:
When connecting auxiliary equipment using a
stereo mini plug cable
• Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX1.
AUX2 source:
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
• Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner's manual.
This auxiliary device is automatically set to
AUX2.
• You can only make this type of connection if
the auxiliary device has RCA outputs.
00
En
)
Selecting AUX as the source
• Press SRC to select AUX as the source.
• If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 27.
Setting the AUX title
The title displayed for the AUX1
or AUX2
source can be changed.
1 After you have selected AUX as the
source, use MULTI-CONTROL and select
FUNCTION to display TITLE INPUT.
2 Enter a title in the same way as the
built-in CD player.
For details concerning operation, refer to
En-
tering disc titles on page
17. (!J
Turning the clock display
on or off
You can turn the clock display on or off.
• Even when the sources are off, the clock
display appears on the display.
• Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.
• The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
(!J
Sound muting
Sound from this unit is muted automatically in
the following cases:
• When a call is made or received using a
cellular telephone connected to this unit.
• When the voice guidance is output from a
Pioneer navigation unit connected to this
unit.