Intellimute - Cobra 14 BAND XRS 9470 Operating Instructions Manual

Settings
Your Detector

IntelliMute

IntelliMute is a unique feature that allows you to avoid alerts you don't need
to hear because you are stopped or moving slowly. By sensing the "revs"
(RPMs) of your engine, IntelliMute knows when you are at low speed and
automatically mutes audio radar alerts.
Before IntelliMute will work, you must set an activation point for your engine's
revs (see page 10). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled
each time the power is turned On. The factory setting is IntelliMute Off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense
the engine's revs. In such cases, you can reduce unwanted audio alerts
by using Auto Mute and City mode when appropriate.
To Turn IntelliMute On
Press and release
the IntelliMute
button.
To Turn IntelliMute Off
Press and release
the IntelliMute
button again.
Tone
Two beeps
Tone
One beep
Voice
IntelliMute On
Voice
IntelliMute Off
Nothing Comes Close to a Cobra
IntelliMute Button
Press and release
Visual Display
Dot appears next to
the large character
on the right
Visual Display
Dot disappears
® 9