Settings
Your Detector
Settings
When changing the Settings on your detector, please keep in mind:
Buttons can have multiple functions.
Depending on your choice of Voice Alert or Tone Alert mode, you will
hear either voice messages or tones confirming changes in settings.
All settings will be stored in memory when the power is
turned Off and recalled when the power is turned back On.
Highway/City Mode
Setting your detector to City mode delays all X band audio alerts until
the signal strength reaches Level 3. (A single beep will sound when the
signal is first detected.) This will reduce false alerts while you are driving
in, or near, urban areas where there are many sources for conflicting
X band signals such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates
what you will see and hear (either in Voice Alert or Tone Alert mode)
as you complete each step. The factory setting is Highway mode.
h
X K Ka V S
City Mode
c
X K Ka V S
To Change From Highway Mode to City Mode
Press and release
the City button.
To Change From City Mode Back to Highway Mode
Press and release
the City button again.
English
6
Tone
One beep
Tone
Two beeps
Voice
City
Voice
Highway
•
Press and
release
Visual Display
c
appears
in the display
Visual Display
h
appears
in the display