Clean The Shuttle Assembly - IKEA sewing machine Instruction Manual

ENGLISH

Clean the shuttle assembly

Dismantle the shuttle assembly
1. Move the needle to its highest position, remove the accessories
compartment and open the cover.*
2. Remove the bobbin case by releasing the little latch and pulling the
bobbin case out.
3. Push the shuttle race levers aside. Lift out the retaining ring and the
shuttle by pulling the pin in the centre of the shuttle.
4. Use the brush to remove dust and threads from the parts.
* WARNING! Always unplug the sewing machine from the wall socket before
you leave it or before you replace machine parts.
26
Bobbin
Shuttle
Lever
Bobbin case
Retaining ring
Shuttle
driver
Lever