Table of Contents
Advertisement
Power management
POWeR ReQUIRemenTs
The Fridge/Freezer is designed to operate on AC and DC voltage inputs.
AC input
DC input
For optimum performance and efficiency, it is important that the appliance has a reliable 15A fuse
protected DC supply in good condition. Direct connection to the battery is recommended and
reduces the risk of voltage dropping to the appliance.
It is recommended that the correct sized Automotive Electrical Cable is used for the direct connection
and that this includes a 15A fuse; do not use resettable circuit breakers. It is important that the
correct cable size is used for the installation of the DC supply as over distance the voltage can
decrease if the incorrect sized cable is being used.
dIsTance cable GaUGe FOR dc InPUT
4.5m or less
4.6m and over
baTTeRy mOnITOR
The device is equipped with a multi-level battery
monitor that protects your vehicle battery against
excessive discharging when the Fridge/Freezer is
connected to 12/24 V supply.
If the Fridge/Freezer is operated when the vehicle
ignition is switched off, the Fridge/Freezer
switches off automatically as soon as the supply
voltage falls below a set level.
The Fridge/Freezer will switch back on once
the battery has been recharged to the cut in
voltage level.
12V DC Input
High
Med
Low
24V DC Input
High
Med
Low
220-240V AC at 50Hz
12V or 24V DC
2.1mm
(AWG14)
2
3.3mm
(AWG12)
2
Cut out
Cut in
11.7V
12.7V
10.7V
11.7V
10.2V
11.2V
Cut out
Cut in
24.6V
26.0V
22.6V
24.0V
21.6V
23.0V
MED
HIGH
LOW
Battery Monitor Control
Hide quick links:
Advertisement
Table of Contents
