Floppy Drive A; Video Setting; Halt On Setting - Foxconn K8M890M2MA User Manual

Award(Phoenix)BIOS can support 3 HDD modes:CHS, LBA and Large or Auto mode.
CHS For HDD<528MB
LBA For HDD>528MB & supporting LBA (Logical Block Addressing)
Large For HDD>528MB but not supporting LBA
Auto Recommended mode

Floppy Drive A

This option allows you to select the kind of FDD to be installed, including "None",
[360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and [2.88 M, 3.5 in].

Video Setting

The following table is provided for your reference in setting the display mode for
your system.
EGA/VGA Enhanced Graphics Adapter / Video Graphic Array. For
EGA, VGA, SEGA, SVGA, or PGA monitor adapters.
CGA 40 Color Graphic Adapter, powering up in 40 column mode.
CGA 80 Color Graphic Adapter, powering up in 80 column mode.
MONO Monochrome adapter, including high resolution monochrome adapters.

Halt On Setting

This category determines whether or not the computer will stop if an error is
detected during powering up.
All Errors
No Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
20
Whenever the BIOS detects a nonfatal error, the system
will stop and you will be prompted.
The system boot will not stop for any errors that may
be detected.
The system boot will not stop for a keyboard error; but
it will stop for all other errors.
The system boot will not stop for a diskette error; but
it will stop for all other errors.
The system boot will not stop for a keyboard or disk
error, but it will stop for all other errors.
Chapter 3 BIOS Description