IOGear Network Adapter GUW2015V Installation Manual page 9

1. VGA : VGA Activity Indicator
a. LED is solid when display cable is connected
b. LED is blinking when data is being transferred
2. PWR: Power Indicator
a. LED is solid when power is applied
3. 1 – 2 – 3: Status Indicator
a.
Single* solid light: device is wirelessly connected to
the selected Wireless USB Host Adapter
b.
Single* slowly blinking light: device is searching for
a Wireless USB Host Adapter
c.
Single* quickly blinking light: device is trying to con-
nect to a Wireless USB Host Adapter
d.
Rapidly scrolling lights: device is used in wired
mode.
e.
Three Simultaneous Blinking Lights: Cable As-
sociation Mode
*Only one light at a time. The position of the light indicates
which Wireless USB Host Adapter the device is trying to
communicate with.
4. PWR plug
a.
Power adapter socket
5. RESET
a.
Association history can be erased by pressing and
holding this button for 10 seconds
6. HOST
a.
This button is used to select a different Wireless
USB Host Adapter
7. USB connector
a.
In wireless mode, this connector is used for cable
association
b.
In wired mode, this connector is used for wired
operation
8. WIRELESS/WIRED switch
a.
Choose from wired or wireless mode by using
this switch
9