USE & OPERATION
Control Knobs
SPEED / ON - OFF
Connect to the power supply and turn the SPEED knob. The
fan will start. Change the speed from 1 to 3 (1 for Low, 2 for
Medium and 3 for High fan speed). To switch OFF the unit,
turn the SPEED knob to 0.
COOL
To begin cooling the desired area, turn the COOL knob to the
ON position. The water pump will operate. The cooler air will
be felt after the Honeycomb Cooling Media is completely wet.
SWING
Turn the SWING knob to the ON position. The louvers will
begin to move from right to left automatically.
Horizontal Louvers
Manually adjust the horizontal louvers to change vertical
airflow.
10
0
3
2
1
SPEED
OFF ON
COOL
OFF ON
SWING