Maintenance
Cleaning the spray arms
The spray arm jets can get blocked by
particles inside them.
The spray arms should, therefore, be
checked daily.
^ Use a sharp pointed object to push
particles into the spray arm jets, and
rinse well under running water.
Remove the spray arms as follows:
^ Take any mobile units out of the wash
cabinet.
Spray arms in the wash cabinet:
^ Use an SW 60 spanner to loosen the
connection and then pull the spray
arm upwards or downwards.
44
Spray arms in mobile units/modules:
^ Turn the nut (left hand thread)
together with the spray arm
clockwise and then pull the spray
arm downwards and off.
^ After cleaning the spray arms screw
them back into position.
After replacing the spray arms rotate
them to make sure they move freely.