Miele G 7825 Operating Instructions Manual page 15

Empty any containers or utensils
before arranging them in the
machine.
Do not allow any remains of acids
or solvents, and in particular
hydrochloric acid or chloride solutions,
to get into the wash cabinet. Similarly
avoid any materials with a corrosive
effect. The presence in compounds of
any solvents should be minimal
(especially those in hazard class A1).
Ensure that solutions or steam
containing hydrochloric acid do not
come into contact with the steel outer
casing of the machine, to avoid any
corrosion damage.
Please follow the advice on
installation in these instructions
and the separate Installation
Instructions.
Using accessories
Only use genuine Miele
accessories with this machine.
Consult Miele on the type and
application of such equipment.
Only use Miele mobile units,
baskets and inserts in this
machine. Using accessories made by
other manufacturers, or making
modifications to Miele accessories can
result in unsatisfactory cleaning and
disinfecting results, for which Miele
cannot be held liable. Any resultant
damage would also invalidate the
machine guarantee.
Warning and safety instructions
Disposal of your old machine
Before throwing an old machine
away it must first be made
unusable. Disconnect from the mains
and cut off the cable as close to the
machine as possible.
Please note that the machine may have
contamination from blood or other
bodily fluids in it and must be
decontaminated before disposal.
For environmental and safety reasons
ensure the machine is completely
drained of any residual water, chemical
residues and cleaning agent. Observe
safety regulations and wear safety
goggles and gloves.
Make the door lock inoperable, and
block or disable the door in such a way
that children cannot accidentally shut
themselves in the cabinet. Then make
appropriate arrangements for the safe
disposal of the machine. For tank
system machines ensure that any water
is emptied out of the tank before it is
moved.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
15