Sony BDP-CX7000ES Operating Instructions Manual page 89

Audio Output Signals
The audio output differs as follows, depending on the source, output jack, and the selected
settings.
LPCM 2ch 5.lch 2ch
LPCM 2ch 7.lch 2ch
LPCM 2ch
Dolby Digital!
LPCM 2ch 5.lch 2ch
LPCM 2ch*6
LPCM 2ch
Dolby Digitall LPCM 2ch
7.1ch 2ch
LPCM 2ch*6
LPCM 2ch
Dolby Digitall LPCM 2ch
7.lch 2ch
LPCM 2ch*6
LPCM 2ch
DTSI
LPCM 2ch 5.lch 2ch
LPCM 2ch*6
LPCM 2ch
DTSI
LPCM 2ch 7.lch 2ch
•
LPCM 2ch*6
LPCM 2ch
DTSI
LPCM 2ch 7.lch 2ch
>
LPCM 2ch*6
CL
CL
-
LPCM 2ch
LPCM 2ch LPCM 2ch 2ch 2ch
0
;:,
LPCM 2ch Dolby Digital LPCM 2ch 5.lch 2ch
l»
LPCM 2ch DTS LPCM 2ch 5.lch 2ch
;:,
-
0
....
LPCM 2ch LPCM 2ch LPCM 2ch 2ch 2ch
3
l»
-
LPCM 2ch DTS LPCM 2ch 5.lch 2ch
0
;:,
*\ When "Audio Output Priority" is set to "Stereo
Analog," LPCM 2ch signals are output from
each jack.
*2 When "Audio Output Priority" is set to "HDMI,"
"CoaxiaI/Optical" or "Multi Channel Analog,"
LPCM 2ch signals are output from jacks other
than the selected jack.
*3 Auto: when "Audio (HDM!)" is set to "Auto" in
the "Audio Settings" setup (page 71).
2ch PCM: when "Audio (HDM!)" is set to "2ch
PCM" in the "Audio Settings" setup (page 71).
*4
Bitstream: when "Dolby Digital" is set to
"Dolby Digital" or "DTS" is set to "DTS" in the
"Audio Settings" setup (page 72).
*s
When "BD Audio Setting" is set to "Direct,"
audio recorded by the source is output by
bitstream. However, this audio may be output as
follows depending on the audio formats
supported by the AV amplifier (receiver).
- When the AV amplifier (receiver) does not
support HD Audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio and
DTS-HD Master Audio) but supports Multi-ch
LPCM, up to LPCM 7.lch is output.
- When the AV amplifier (receiver) does not
support HD Audio or Multi-ch LPCM but
supports Dolby Digital/DTS, a Dolby Digital
or DTS bitstream is output.
- When the A V amplifier (receiver) does not
support HD Audio, Multi-ch LPCM or Dolby
Digital/DTS, LPCM 2ch is output.
"6 The 2-channel or less-channel primaryl
secondary audio signals are output as LPCM 2ch
signals.
"
When outputting 480i/480p video signals from the
HDMI OUT jack, Dolby TrueHD and DTS-HD
Master Audio are output as LPCM, Dolby Digital,
or DTS bitstream signals even if "BD Audio
Setting" is set to "Direct" in the "Audio Settings"
setup (page 71).
89 us