Sony BDP-CX7000ES Operating Instructions Manual page 83

The HO Audio (Dolby Digital Plus, Dolby
TrueHO, OTS-HO High Resolution Audio,
and OTS-HO Master Audio) is not output
by bitstream.
... Set "BO Audio Setting" to "Oirect" in the
"Audio Settings" setup (page 71 ).
... Check that the connected AV amplifier
(receiver) is compatible with each HO
Audio format.
The interactive audio is not output.
... Set "BO Audio Setting" to "Mix" in the
"Audio Settings" setup (page 71).
There is no picture or no sound when
connected to the HOMI OUT jack.
... Try the following: <DTurn the player off
and on again. ®Turn the connected
equipment off and on again. ®Oisconnect
and then reconnect an HOMI cable.
There is no picture or picture noise
appears when connected to the HOMI OUT
jack.
... The HOMI OUT jack is connected to a OVI
device that does not support copyright
protection technology.
... If the HOMI OUT jack is used for video
output, changing the video output
resolution may solve the problem
(page 66).
No sound is output from the HOMI OUT
jack.
... The HOMI OUT jack is connected to a OVI
device (OVI jacks do not accept audio
signals).
The sound is not output correctly when
connected to the HOMI OUT jack.
... The device connected to the HOMI OUT
jack does not support the audio format of
the player. Check the audio settings
(page 69).
The display language on the screen
switches automatically when connected to
the HOMI OUT jack.
... When "Control for HOMI" is set to "On"
(page 76), the display language on the
screen automatically switches according to
the language setting of the connected TV (if
you change the setting on your TV, etc.).
The "Control for HOMI" function does not
work (BRAVIA Sync).
... Check that the AC power cord of the
connected component is securely
connected.
... If the HOMI indicator does not appear in
the front panel display, check the HOMI
connection (page 19, 24).
... Set "Control for HOMI" to "On" (page 76).
... Make sure that the connected component is
compatible with the "Control for HOMI"
function. For details, refer to the operating
instructions supplied with the component.
... Check the connected component's setting
for the "Control for HOMI" function. For
details, refer to the operating instructions
supplied with the component.
... If you change the HOMI connection, turn
the player off and on again.
... If power failure occurs, set "Control for
HOMI" to "Off," then set "Control for
HOMI" to "On" (page 76).
... For details on the "Control for HOMI"
function, see "About the BRAVIA Sync
Features (HOMI connections only)"
(page 56).
... If you connect the player to a TV through an
AV amplifier (receiver) that is not
compatible with the "Control for HOMI"
function, you may be unable to control the
TV from the player.
The external memory is not recognized.
... Try the following: <DTurn the player off.
®Align the
~
mark of the EXT slot with
the
~
mark on the external memory (in case
of USMIGHlUSM2GH), and insert the
external memory. ®Turn the player on.
0Check that the EXT indicator lights up in
the front panel display.
•
=
C I
=
A I
=-
-
C I
3
AI
-
Q '
=
"continued
83us