Sony BDP-S500 Service Manual
Hide thumbs Also See for BDP-S500:

Advertisement

SERVICE MANUAL
Ver. 1.0 2007.10
System
Laser: Semiconductor laser
Outputs
(Jack name: Jack type/Output level/
Load impedance)
AUDIO OUT L/R:
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (OPTICAL):
Optical output jack/–18 dBm (wave
length 660 nm)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
5.1CH OUTPUT:
Phono jack/2 Vrms/10 kilohms
HDMI OUT:
HDMI 19-pin standard connector
COMPONENT VIDEO OUT(Y, P
P
):
R
Phono jack/Y: 1.0 Vp-p/P
progressive or interlace
= 0.7 Vp-p/75 ohms
SPECIFICATIONS
VIDEO: Phono jack/1.0 Vp-p/75 ohms
S VIDEO: 4-pin mini DIN/Y:
1.0 Vp-p, C: 0.286 Vp-p/75 ohms
General
Power requirements:
120 V AC, 60 Hz (US, Canadian)
220-240 V AC, 50/60 Hz
(Except US, Canadian)
Power consumption: 33 W
Dimensions (approx.):
430 × 99.2 × 361 mm (17 × 4 ×
1
14
/
in.) (width/height/depth) incl.
4
projecting parts
Mass (approx.): 4.8 kg (10
,
B
, P
:
B
R
TM
BDP-S500
RMT-B101A/B101P
Canadian Model
Russian Model
Australian Model
Operating temperature:
5 ºC to 35 ºC (41°F to 95°F)
Operating humidity:
25 % to 80 %
Supplied accessories
• Video cord (phono plug × 1) (1)
• Stereo audio cord (phono plug × 2) (1)
• Power cord (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
• GNU License Information
(English only) (1)
(Except US, Canadian)
3
/
lb)
Specifications and design are subject to
4
change without notice.
BLU-RAY DISC PLAYER
US Model
AEP Model
UK Model

Advertisement

Table of Contents
loading

Summary of Contents for Sony BDP-S500

  • Page 1 BDP-S500 RMT-B101A/B101P SERVICE MANUAL US Model Canadian Model Ver. 1.0 2007.10 AEP Model UK Model Russian Model Australian Model SPECIFICATIONS System VIDEO: Phono jack/1.0 Vp-p/75 ohms Operating temperature: S VIDEO: 4-pin mini DIN/Y: 5 ºC to 35 ºC (41°F to 95°F) Laser: Semiconductor laser 1.0 Vp-p, C: 0.286 Vp-p/75 ohms...
  • Page 2 FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS It is best to use only unleaded solder but unleaded solder may QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS also be added to ordinary solder.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS Section Title Page Section Title Page SERVICE NOTE SCHEMATIC DIAGRAMS AND PRINTED WIRING DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION) ..4 BOARDS TEST DISC ..............4 POSITION OF COUNTERMEASURE PARTS .... 17 4-1.
  • Page 4: Service Note

    SERVICE NOTE 1. DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION) 1. Remove the upper case. (Refer to page 2-1) 2. Remove the front display block assy. (Refer to page 2-2) 3. Insert a clip in the hole of a drive and open a tray. clip tray 2.
  • Page 5 2-1-1. BLX-104 Menu Function (1) Main Menu 1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed. 2-1-2. BLX-104 Menu Function (2) Main Menu To Main Menu after playback of T62_C1 To Main Menu after playback of T61_C1 To Main Menu after playback from T54_C1 to T60_C1 Sub_menu3 is displayed To Main Menu after playback of T21_C1...
  • Page 6 2-1-3. BLX-104 Menu Function (3) Main Menu To Main Menu after playback of T52_C1 To Main Menu after playback of T51_C1 To Main Menu after playback from T44_C1 to T50_C1 Sub_menu2 is displayed To Main Menu after playback of T42_C1 To Main Menu after playback of T41_C1 To Main Menu after playback from T23_C1 to T40_C1 Sub_menu4 is displayed...
  • Page 7 2-1-4. BLX-104 Menu Function (4) Sub menu1 1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.
  • Page 8 2-1-5. BLX-104 Menu Function (5) Sub menu2 1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
  • Page 9 2-1-6. BLX-104 Menu Function (6) Sub menu3 1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
  • Page 10 2-1-7. BLX-104 Menu Function (7) Sub menu4 1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.
  • Page 11 2-2-1. BLX-204 Menu Function (1) Main Menu 1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed. 2-2-2. BLX-204 Menu Function (2) Main Menu To Main Menu after playback of T83_C1 To Main Menu after playback of T62 t T82 To Main Menu after playback of T61_C1 To Main Menu after playback of T54_C1-T60_C1 t T83_C1-T94_C1 Sub_menu3 is displayed...
  • Page 12 2-2-3. BLX-204 Menu Function (3) Main Menu To Main Menu after playback of T70_C1 To Main Menu after playback of T52_C1tT69 To Main Menu after playback of T51_C1 To Main Menu after playback of T44_C1-T50_C1tT71_C1-T81_C1 Sub_menu2 is displayed To Main Menu after playback of T68_C1 To Main Menu after playback of T42_C1 To Main Menu after playback of T41_C1 To Main Menu after playback from T23_C1 to T40_C1...
  • Page 13 2-2-4. BLX-204 Menu Function (4) Sub menu 1 1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.
  • Page 14 2-2-5. BLX-204 Menu Function (5) Sub menu 2 1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
  • Page 15 2-2-6. BLX-204 Menu Function (6) Sub menu 3 1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
  • Page 16 2-2-7. BLX-204 Menu Function (7) Sub menu 4 1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.
  • Page 17: Position Of Countermeasure Parts

    3. POSITION OF COUNTERMEASURE PARTS – 17 –...
  • Page 18 MEMO – 18 –...
  • Page 19: General

    Refer to them whenever you call direct sunlight as the temperature may Refer servicing to qualified personnel A grounding type plug has two upon your Sony dealer regarding this product. the player from the wall outlet. To rise considerably inside the car. only.
  • Page 20: Getting Started

    This product incorporates copyright protection technology that connecting Sony components that are compatible with the proposed by Sony, and is a trademark of Sony Corporation. is protected by U.S. patents and other intellectual property rights. HDMI Control function with an HDMI cord.
  • Page 21 720p/1080i/1080p video signals. The using an HDMI cord, you will need to do one of the following: Use a certified Sony HDMI cord (not supplied) to enjoy high Audio Cords HDMI indicator lights up when an HDMI device is connected.
  • Page 22 Easy Setup manufacturer’s code. You can control the volume, input source, and power switch of Before using, make some simple your Sony TV with the supplied remote. settings for the BD player. While holding down TV [/1, press the number Start buttons to select your TV manufacturer’s code...
  • Page 23: Basic Operations

    Select the aspect ratio that matches your TV, Step 7: Additional Playing a Disc and press ENTER. Adjustments Easy Setup TV Type 16:9 Basic The following settings and adjustments are necessary when your connection applies. Operations Select the screen aspect ratio to match For video connection your TV.
  • Page 24 Guide to the Remote A Z OPEN/CLOSE (page 20) Entering characters – Opens/closes the disc tray. DATA DVD TV &/1 (page 17) – Turns the TV on or to standby mode. When an on-screen keyboard appears (e.g., when searching for a title), enter the characters as follows.
  • Page 25 Hints Clarifying Low Volume Adjusting the Pictures Fine-tuning the picture to your • You can also check disc information on the front panel display (page 59) or the Title List display (page 22). preference • You can check the audio information by pressing AUDIO. Sounds (Audio DRC) Memory1 White Adjust...
  • Page 26: Watching Movie Files

    About the “Movies” (All Movies) Title List Viewing All Titles Playing a title display a After step 3 of “Viewing All Titles” above, select the title you want to play, and press All Movies 1214 items Watching Movie ENTER. Spider 1:31 Smoother 1:02...
  • Page 27: Listening To Music Files

    About the “Music” (All Songs) Title List display Viewing All Artists Playing a track a After step 3 of “Viewing All Artists” above, All Songs 1214 items narrow down the list of tracks by selecting Never Let Me Down (Split Mix) 9:31 Policies of Truth 8:00...
  • Page 28: Viewing Photo Files

    About the “Photos” (All Photos) Title List Viewing All Folders Playing a slideshow display a After step 3 of “Viewing All Folders” above, All Photos 1214 items press < and select “All Photos” from the Browse menu. Viewing Photo DATA DVD File:Summer of '06.jpg File : DSC00434.jpg b Select the file you want to start from, and...
  • Page 29: Changing The Initial Settings

    Using the Setup Displays Video Setup Changing the Underlined items are the default settings. DATA DVD Initial Settings From the “System Menu,” enter the “Setup” displays to change the settings of the player. TV Type – 4:3 screen TV. – Select your TV type. Select “Setup”...
  • Page 30 About the audio output signals Language The audio output differs as follows, depending on the source, output jack, and the selected settings. Jacks/ DIGITAL OUT (OPTICAL/ AUDIO OUT L/R jacks* HDMI OUT jack* settings COAXIAL) jacks* Disc/source 5.1ch Bitstream PCM* Auto* Linear PCM 2ch 2ch LPCM...
  • Page 31: Additional Information

    Should any problem persist, Information consult your nearest Sony dealer (For customers in the USA , Set “Video Control” in “A/V Control” to “Standard” The MP3 audio track file cannot be played only).
  • Page 32 Play, Repeat Play, or Random Play appears on the front panel display. cannot be performed. , Contact your Sony dealer or local authorized Sony service facility. , Depending on the disc, you may not be able to do some of the operations above.
  • Page 33 “modification”.) Each that you also do one of the following: they do not excuse you from the conditions Yoyodyne, Inc., hereby disclaims all copyright http://www.sony.net/Products/Linux MERCHANTABILITY AND FITNESS licensee is addressed as “you”. Accompany it with the complete of this License.
  • Page 34 “BD-J” offers content providers almost Interface) (page 8) supports 7.1 multi-channel surround changes the data to be allocated xvYCC standard proposed by Sony, and unlimited functionality when creating sound. according to the status of the picture is HDMI is an interface that supports both Specifications and design are subject to is a trademark of Sony.
  • Page 35 Language (abbr.) Code Language (abbr.) Code Language Code Parental Control Hindi (hi) 0809 Sinhalese (si) 1909 List Country/Area Croatian (hr) 0818 Slovak (sk) 1911 Hungarian (hu) 0821 Slovenian (sl) 1912 Code List Armenian (hy) 0825 Samoan (sm) 1913 Interlingua (ia) 0901 Shona (sn) 1914...
  • Page 36 MEMO 1-18E...
  • Page 37: Disassembly Flow

    BDP-S500 SECTION 2 DISASSEMBLY • This set can be disassembled in the order shown below. 2-1. DISASSEMBLY FLOW 2-2. UPPER CASE (Page 2-1) 2-3. FRONT DISPLAY BLOCK 2-6. MAIN BOARD 2-7. AU-258 BOARD 2-8. POWER BLOCK ASSY (Page 2-3) (Page 2-3)
  • Page 38: Front Display Block Assy

    2-3. FRONT DISPLAY BLOCK ASSY 1 two screws (Tightening torque: 6.0 ± 0.5kgf-cm) 2 front display block assy 1 two screws (Tightening torque: 6.0 ± 0.5kgf-cm) 2-4. TRAY COVER ASSY 1 Insert a clip in the hole of a drive and open a tray.
  • Page 39: Bd Drive (Service Use)

    2-5. BD DRIVE (SERVICE USE) 5 two screws 5 two screws 8 BD drive (service use) 7 connector 7 connector (CN200) 1 three claws 4 two screws 3 connector (CN203) 1 four claws 2 front panel assy 2-6. MAIN BOARD 8 six screws (BV3) 4 connector (CN6701)
  • Page 40: Board

    2-7. AU-258 BOARD 3 four screws (BV3) 1 connector (CN5701) 5 AU-258 board 2 three screws (BV3) 2-8. POWER BLOCK 3 connector (CN203) 2 connector 1 two connectors (CN102) (CN201, 202) 3 five screws (BV3) 4 power block...
  • Page 41: Circuit Boards Location

    2-9. CIRCUIT BOARDS LOCATION AU-258 board MAIN board IR-063 board FL-180 board power block FR-276 board...
  • Page 42 MEMO 2-6E...
  • Page 43: Block Diagrams

    BDP-S500 SECTION 3 BLOCK DIAGRAMS 3-1. MAIN BLOCK DIAGRAM AUDIO (SEE PAGE 3-3) CN5701 MAIN BOARD 256MByte 128MByte (DB-BMB103) DDR 512Mbit DDR 512Mbit DRAM1 DRAM0 CN1802 BD-ROM DIGITAL OUT ATAPI Parallel DRIVE Flash 512Mbit (BPD-100) OPTICAL SPDIF1 COAXIAL 27MHz VIDEO OUT...
  • Page 44: Audio Block Diagram

    BDP-S500 3-2. AUDIO BLOCK DIAGRAM AU-258 BOARD (SEE PAGE 4-5) ADATA5_1 ADATA5_2 DATA DATA ALRCK ALRCK LRCK LRCK ABCLK ABCLK BICK BICK Aout L- Aout L- MCLK MCLK MCLK MCLK IC011 IC010 IC008 IC007 AUDIO AUDIO DAC_XCS_2 DAC_XCS_2 X-MS X-MS –...
  • Page 45: Fl/Fr Block Diagram

    BDP-S500 3-3. FL/FR BLOCK DIAGRAM FL-180 BOARD IC100 (SEE PAGE 4-13) FL DRIVE S(1)-(16) SEG1 ND100 SEG16 FLUORESCENT INDICATOR TUBE COM(1)-(11) GRID2 GRID12 IC200 DOOR MOTOR CONTROLLER CN201 SWDRDN CN200 SWDRUP DN_STOP BD-ROM IC201 DRIVE DOOR MOTOR DRIVE (BPD-100) DRIVING...
  • Page 46: Power 1 Block Diagram

    BDP-S500 3-4. POWER 1 BLOCK DIAGRAM POWER BLOCK MAIN BOARD (DB-BMB103) CN202 CN6002 SW+12V SW+12V SW+3V SW+3V SW+5V SW+5V CN201 CN6051 SW+12V (A) SW+12V (A) SW-12V (A) SW-12V (A) EV+6V EV+6V SW+1.5V SW+1.5V P_ON P_ON Microcomputer ~AC IN CN102 FU101 CN5701 V–12A...
  • Page 47: Power 2 Block Diagram

    BDP-S500 3-5. POWER 2 BLOCK DIAGRAM AU-258 BOARD (SEE PAGE 4-5) CN001 V-12A IC001 Q002 B- SWITCH REG. POWER 1 V+12A Q004 (SEE PAGE 3-8) B+ SWITCH V+3D Q005 SWITCH IC011 IC009 IC010 IC002 REG. IC003 REG. IC008 IC007 IC006...
  • Page 48: Power 3 Block Diagram

    BDP-S500 3-6. POWER 3 BLOCK DIAGRAM FR-276 BOARD FL-180 BOARD (SEE PAGE 4-17) (SEE PAGE 4-13) CN102 CN100 CN601 IC601 V+5FL V+5E REMOTO COMMANDER RECEIVER D101 D101,102 POWER 1 D603 IC201 IC200 IC100 (LED Blue) D102 (SEE PAGE 3-8) HDMI...
  • Page 49: Schematic Diagrams And Printed Wiring Boards

    BDP-S500 SECTION 4 SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS 4-1. FRAME SCHEMATIC DIAGRAM JA4101 VIDEO OUT VIDEO IR-063 S VIDEO BOARD J001 JA4201 5.1CH OUTPUT AC-Inlet COMPONENT DIGITAL OUT J003 VIDEO OUT JA4501 JA5502 HDMI AUDIO REAR FRONT OPTICAL CENTER...
  • Page 50 BDP-S500 THIS NOTE IS COMMON FOR WIRING BOARDS AND SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For printed wiring boards) • b: Pattern from the side which enables seeing. (The other layers’ patterns are not indicated) •...
  • Page 51: Printed Wiring Boards And Schematic Diagrams

    BDP-S500 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS AU-258 (ANALOG AUDIO) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No. : AU-258 board; 1,000 series – AU-258 BOARD AUDIO R103 3.3k 0.5% -REF.NO.:1,000 SERIES- R081 C081 1.8k...
  • Page 52: Printed Wiring Board

    BDP-S500 AU-258 BOARD (SIDE A) AU-258 (ANALOG AUDIO) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No. : AU-258 board; 1,000 series – IC004 H-11 IC006 : Uses unleaded solder.
  • Page 53 BDP-S500 AU-258 BOARD (SIDE B) CN001 AUDIO OUT C033 R110 R084 C084 R083 R109 C120 R108 C056 Q002 R011 R138 IC009 Q019 IC001 R082 C081 R104 R105 R081 C119 R017 Q018 R103 R137 C035 R019 C C C R088 C088...
  • Page 54: 1/2) (Indicator Drive)

    BDP-S500 FL-180 (1/2) (INDICATOR DRIVE) SCHEMATIC DIAGRAM • See page 4-15 for printed wiring board. – Ref. No. : FL-180 board; 2,000 series – FL-180 BOARD (1/2) INDICATOR DRIVE -REF.NO.:2,000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE ∗:IMPOSSIBLE TO MEASURE THE VOLTAGE AT THE MARKED POINTS.
  • Page 55: 2/2) (Door Drive) Schematic Diagram

    BDP-S500 FL-180 (2/2) (DOOR DRIVE) SCHEMATIC DIAGRAM • See page 4-15 for printed wiring board. – Ref. No. : FL-180 board; 2,000 series – FL-180 BOARD (2/2) DOOR DRIVE R212 -REF.NO.:2,000 SERIES- XX MARK:NO MOUNT R210 100 NO MARK:PB MODE...
  • Page 56 BDP-S500 FL-180 (INDICATOR DRIVE, DOOR DRIVE) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No. : FL-180 board; 2,000 series – : Uses unleaded solder. • See page 2-5 for circuit boards location.
  • Page 57 BDP-S500 R115 JL107 JL110 JL106 Q109 R207 C114 Q110 R121 JL109 R223 S100 R219 R205 R203 R116 JL108 C113 R220 Q111 Q107 T100 C106 JL105 C110 R108 C112 R107 JL104 IC200 C104 JL103 C103 R105 C212 R216 IC100 Q106 R215...
  • Page 58: Led Drive, Function Key

    BDP-S500 FR-276 (LED DRIVE, FUNCTION KEY) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No. : FR-276 board; 1,000 series – : Uses unleaded solder. • See page 2-5 for circuit boards location.
  • Page 59 BDP-S500 FR-276 BOARD (SIDE B) OPEN/CLOSE UP/DOWN > S601 S600 S602 S605 S604 S606 S603 S613 S612 S615 S614 S616 JL602 JL604 JL605 JL603 JL601 JL607 Q601 C603 C630 Q603 Q602 JL606 D611 D613 IC601 D612 D601 D602 D603 FL OFF...
  • Page 60 BDP-S500 FR-276 (LED DRIVE, FUNCTION KEY) SCHEMATIC DIAGRAM • See page 4-19 for printed wiring board. – Ref. No. : FR-276 board; 1,000 series – FR-276 BOARD S602 LED DRIVE,FUNCTION KEY S612 R617 -REF.NO.:1,000 SERIES- 1.8k R615 XX MARK:NO MOUNT...
  • Page 61: Connector) Schematic Diagram

    BDP-S500 IR-063 (CONNECTOR) SCHEMATIC DIAGRAM IR-063 (CONNECTOR) PRINTED WIRING BOARD – Ref. No. : IR-063 board; 1,000 series – – Ref. No. : IR-063 board; 1,000 series – : Uses unleaded solder. • See page 2-5 for circuit boards location.
  • Page 62 BDP-S500 MEMO 4-28E...
  • Page 63: Troubleshooting

    BDP-S500 SECTION 5 TROUBLESHOOTING...
  • Page 72 5-10...
  • Page 73 5-11...
  • Page 74 5-12...
  • Page 75 5-13...
  • Page 76 5-14...
  • Page 77 5-15...
  • Page 78 5-16...
  • Page 79 5-17...
  • Page 80 MEMO 5-18E...
  • Page 81: Repair Parts List

    BDP-S500 SECTION 6 REPAIR PARTS LIST 6-1. EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they may • The mechanical parts with no reference number in The components identified by mark 0 or dotted line with mark 0 are have some difference from the original one.
  • Page 82: Main Chassis Block

    6-1-2. MAIN CHASSIS BLOCK (US, CND) not supplied not supplied not supplied (US, CND) (US, CND) not supplied (US, CND) main block (US, CND) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1334-394-A FR-276 BOARD, COMPLETE 3-077-331-31 +BV3 (3-CR) 3-077-331-01 +BV3 (3-CR) * 59...
  • Page 83: Main Block

    6-1-3. MAIN BLOCK not supplied (AU-258 board) not supplied (IR-063 board) supplied not supplied not supplied not supplied not supplied (US, CND) not supplied not supplied (US, CND) not supplied not supplied The components identified by mark 9 contain confidential information. The components identified by Les composants identifiés par une Strictly follow the instructions whenever the components are repaired...
  • Page 84: Electrical Parts List

    AU-258 6-2. ELECTRICAL PARTS LIST NOTE: The components identified by mark • Due to standardization, replacements in the • Items marked “*” are not stocked since they 0 or dotted line with mark 0 are parts list may be different from the parts speci- are seldom required for routine service.
  • Page 85 AU-258 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C134 1-136-165-00 FILM 0.1uF R011 1-216-833-11 METAL CHIP 1/10W C137 1-162-927-11 CERAMIC CHIP 100PF C138 1-162-927-11 CERAMIC CHIP 100PF R012 1-216-833-11 METAL CHIP 1/10W C139 1-162-927-11 CERAMIC CHIP 100PF R017 1-216-833-11 METAL CHIP...
  • Page 86 AU-258 FL-180 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R140 1-208-774-11 METAL CHIP 0.5% 1/10W < CONNECTOR > R141 1-208-774-11 METAL CHIP 0.5% 1/10W CN102 1-785-468-41 CONNECTOR, FFC/FPC 13P R142 1-208-774-11 METAL CHIP 0.5% 1/10W CN200 1-774-730-21 PIN, CONNECTOR (PC BOARD) 3P R143...
  • Page 87 FL-180 FR-276 IR-063 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R132 1-216-837-11 METAL CHIP 1/10W < TRANSISTOR > R200 1-216-837-11 METAL CHIP 1/10W Q601 8-729-027-46 TRANSISTOR DTC114YKA-T146 R201 1-216-809-11 METAL CHIP 1/10W Q602 8-729-027-46 TRANSISTOR DTC114YKA-T146 R202 1-216-839-11 METAL CHIP...
  • Page 88 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark MISCELLANEOUS PARTS ******************** 0 104 1-474-057-41 POWER BLOCK (ZSSR641GA) (US, CND) 0 104 1-474-057-51 POWER BLOCK (ZSSR641IA) (AEP, UK, RUS, AUS) 1-787-625-21 FAN, DC * 59 1-834-510-11 CABLE, FLEXIBLE FLAT (FLR-013) 1-834-511-11 CABLE, FLEXIBLE FLAT (FML-004) A-1337-676-A DRIVE (SOEM (SERVICE USE R1)) (US, CND) A-1337-677-A DRIVE (SOEM (SERVICE USE R2)) (AEP, UK)
  • Page 89 BDP-S500 Sony Corporation 2007J0500-1 9-883-968-21 Home Electronics Network Company © 2007. 10 – 110 – Published by Quality Assurance Dept.
  • Page 90 BDP-S500 REVISION HISTORY Ver. Date Description of Revision 2007.10...

This manual is also suitable for:

Rmt-b101aRmt-b101p

Table of Contents