Installing A Drive Carrier Module - Gateway E-842R User Manual

Chapter 4: Troubleshooting

Installing a drive carrier module

All drive bays must have drive carrier
modules or dummy carrier modules
installed to maintain a balanced airflow.
Dummy carrier modules are provided for
fitting in all unused drive bays. They are
designed as integral drive module front
caps and must be installed in all unused
drive bays to maintain a balanced
airflow. If you plan to remove a drive for
more than a few minutes, we
recommend that you temporarily install
a dummy carrier module in its place.
64
Withdraw the module from the drive bay.
3
Caution
Drive carrier configuration
Before you install the drive carrier modules in your E-842R enclosure, see
"Planning your installation" on page 18
www.gateway.com
for system configuration information.