Unpacking The Enclosure System; Rack Installation Prerequisites - Gateway E-842R User Manual

Chapter 2: Getting Started

Unpacking the enclosure system

Rack installation prerequisites

20
The package contents and unpacking procedure are outlined in the following
illustration.
The accessory box contains the AC power cord(s), a serial communication cord,
and the software and the Gateway External Storage CD (ESCD). The accessory
box insert contains the adjustable rail slides and hardware parts to rack mount
the enclosure.
The enclosure is designed for installation into an industry standard, 19-inch
cabinet, capable of holding the unit.
A minimum depth of 28 inches (700 mm) from the front flange to the back
■
metalwork (excludes back cabling).
Up to 70.5 lbs (32 kg) per enclosure, depending on configuration.
■
A minimum gap of 1 inch (25 mm) of clearance between the rack cover
■
and the front of the drawer, and 2 inches (50 mm) of rear clearance
between the back of the drawer and the back of the rack is recommended,
in order to maintain the correct airflow around the enclosure.
The rack should have a maximum back pressure of 5 pascals (0.5mm water
■
gauge).
www.gateway.com