Table of Contents
Advertisement
www.gateway.com
Viewing the status of the magazine slots
Important
The
command appears only if the
security is disabled or if you are logged in
as Administrator or Operator.
Viewing the tape drive status
The element status reports the status of the magazine slots. The status indicates
whether a slot contains a cartridge or not, and which slot is allocated as the
cleaning cartridge's slot.
To view an element's status:
From the Main menu, scroll to Status, then press E
1
submenu opens.
Scroll to Autoloader, then press E
2
Scroll to Element Status, then press E
3
You can scroll through each of the slots. Slots that are occupied by a data
cartridge are indicated by an asterisk (*). The empty slot that is assigned
to a cleaning cartridge is indicated with an exclamation point (!). The slot
that is occupied by a cleaning cartridge is indicated with an "at" sign (@).
Scroll to the slot containing the cartridge for which you want to see the
4
label, or the cartridge you want to move, then press E
Status screen opens, showing the bar code label for that cartridge. A Move
command also appears on the screen.
If you want to move the cartridge, scroll until the location you want to
move to appears under To:, then press E
- OR -
If you do not want to move the cartridge, press E
To view the tape drive status:
From the Main menu, scroll to Status, then press E
1
submenu opens.
Scroll to Drive, then press E
2
Scroll to Status, then press E
3
messages may include:
Field
Description
SCSI ID
Indicates the drive's SCSI ID number.
Compression
Indicates whether the tape drive compression is enabled or disabled.
Drive Tape
Indicates whether the tape drive is present or not.
Viewing status information
. The Autoloader submenu opens.
NTER
.
NTER
.
NTER
SC
. The Drive submenu opens.
NTER
. A list of messages appears. These
NTER
. The Status
NTER
. The Element
NTER
.
. The Status
NTER
49
Advertisement
Table of Contents
