Related Manuals for Goldair GECO200
Summary of Contents for Goldair GECO200
- Page 2 Goldair Customer Services Team. (refer to 8. The common cause of overheating is deposits of details on back page) dust or fluff in the appliance. Ensure these...
- Page 3 Wall Mounting Position Instructions NOTE: Your Goldair panel heater should be installed with at least 300mm clearance from the floor and any other surrounding parts including other appliances, walls, ceilings, shelves and soft furnishings. 300mm 300mm 300mm 300mm...
- Page 4 Wall Mounting Position Instructions Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging and wall mounting accessories pack has been removed from the unit before use. Mark the positions of the four holes to be Install the panel heater onto the four rail drilled on the wall.
- Page 5 OPERATING INSTRUCTIONS the bolts with a screw driver and then take the heater down Before plugging in and using your new Goldair panel heater, check all surfaces to ensure the IMPORTANT! NEVER COVER THIS HEATER! heater is not damaged in any way.
- Page 6 The unit will then turn on automatically at 6pm and off again at 10pm Indicates actual time SUPPORT AND TECHNICAL ADVICE PO Box 100707, NSMC, Auckland, New Zealand Monday – Friday 8am-5pm Phone: 0800 232 633 Website: www.goldair.co.nz...
- Page 7 Service outside of the warranty period will installation of the product. Normal wear and be at your cost. tear is expressly excluded. Consumers Guarantee Act (1993). If your Goldair product fails to operate accordance with above satisfactorily, please return it to the retailer...