Download  Print this page

Mitsubishi Electric MSZ-FB25VA Operating Instructions Manual

Split-type air conditioners.
Hide thumbs

Advertisement

SPLIT-TYPE AIR CONDITIONERS

INDOOR UNIT

MSZ-FB25VA
MSZ-FB35VA
MSZ-FB50VA
For user
OPERATING INSTRUCTIONS
English
• To use this unit correctly and safely, be sure to read these operating in-
structions before use.

Advertisement

   Related Manuals for Mitsubishi Electric MSZ-FB25VA

   Summary of Contents for Mitsubishi Electric MSZ-FB25VA

  • Page 1: Indoor Unit

    SPLIT-TYPE AIR CONDITIONERS INDOOR UNIT MSZ-FB25VA MSZ-FB35VA MSZ-FB50VA For user OPERATING INSTRUCTIONS English • To use this unit correctly and safely, be sure to read these operating in- structions before use.
  • Page 2 ● OPERATING INSTRUCTIONS ● ONTENTS ■ SAFETY PRECAUTIONS ■ NAME OF EACH PART ■ PREPARATION BEFORE OPERATION ■ AREA SETTING ■ SELECTING OPERATION MODES ■ FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT ■ ECONO COOL OPERATION ■ TIMER OPERATION (ON/OFF TIMER) ■ PLASMA OPERATION ■ CLEAN OPERATION ■ CLEANING ■ WHEN YOU THINK THAT TROUBLE HAS OCCURRED ■ WHEN THE AIR CONDITIONER IS NOT GOING TO BE USED FOR A LONG TIME ■ INSTALLATION PLACE AND ELECTRICAL WORK ■ SPECIFICATIONS...
  • Page 3 AFETY PRECAUTIONS Do not operate switches with wet hands. CAUTION • This may cause electric shock. Do not clean the air conditioner with water or place an object Do not step on an unstable bench to operate or clean the that contains water, such as a fl...
  • Page 4: Remote Controller

    ● OPERATING INSTRUCTIONS ● AME OF EACH PART Indoor unit Remote controller Display section Signal transmitting section Distance of signal : About 6 m Beep(s) is (are) heard from the indoor unit when Remote control Operation the signal is received. receiving section indicator lamp Operation display section Front panel ON/OFF (operate/stop) button Air fi...
  • Page 5: Indoor Unit Display

    REPARATION REA SETTING BEFORE OPERATION Setting the installation position Be sure to set the slide switch inside the remote controller in accordance with the installed position of the indoor unit. Installation position: Left: Distance to objects (wall, cabinet, etc.) is less than 50 cm to the left Center: Distance to objects (wall, cabinet, etc.) is more than 50 cm to the left and right Right:...
  • Page 6: Cool Mode

    ● OPERATING INSTRUCTIONS ● ELECTING OPERATION MODES AUTO mode (Auto change over) The unit selects the operation mode according to the difference between the room temperature and the set temperature. During AUTO mode, the unit changes mode (COOL↔HEAT) when the room temperature is 2°C away from the set temperature for more than 15 minutes.
  • Page 7 AN SPEED AND AIRFLOW DIRECTION ADJUSTMENT Vertical airflow direction (AUTO) The vane is set to the most effi cient airfl ow direction. COOL/DRY:horizontal position. HEAT:downward position. (Manual) For efficient air conditioning, select upper position for COOL/DRY, and lower position for HEAT. During COOL/DRY, when the vane is set to position (4) or (5), the vane automatically moves to horizontal position after 1 hour to prevent any condensation from dripping.
  • Page 8 ● OPERATING INSTRUCTIONS ● CONO COOL OPERATION LASMA OPERATION during COOL mode page 5 to start Press Press to start PLASMA operation. ECONO COOL operation. • PLASMA lamp turns on. (Display section) The unit performs swing operation vertically in various cycle according to the temperature of the unit. Set temperature is set 2°C higher auto- Press again to cancel PLASMA operation.
  • Page 9: Heat Exchanger

    LEANING Instructions: • Switch off the power supply or turn off the breaker before cleaning. • Use only diluted mild detergents. • Be careful not to touch the metal parts with your hands. • Do not expose parts to direct sunlight, heat, or fi re to dry. •...
  • Page 10 ● OPERATING INSTRUCTIONS ● HEN YOU THINK THAT TROUBLE HAS OCCURRED Symptom Explanation & Check points Even if these items are checked, when the unit does not recover from the trouble, stop using the air conditioner and consult your dealer. Outdoor Unit White smoke is discharged • In the heating operation, vapor generated...
  • Page 11: Installation Place

    HEN THE AIR CONDITIONER IS NOT NSTALLATION PLACE AND GOING TO BE USED FOR A LONG TIME ELECTRICAL WORK Installation place Set to the highest temperature in manual COOL mode, Avoid installing the air conditioner in the following places. and operate for 3 to 4 hours. Page 5 • Where there is much machine oil.
  • Page 12 HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN SG79F259H04...

This manual is also suitable for:

Msz-fb35vaMsz-fb50va

Comments to this Manuals

Symbols: 0
Latest comments: