Advertisement
How to identify parts of vacuum cleaner
Handle
Turbo nozzle
(on some models)
Dust cup release button
Cover
Cyclone
Screen
Collar
Cyclone
assembly
Carpet height selector
Brush roll cover
(on some models)
Brush roll
Cord clip
Power switch
Upper cord wrap
Power cord
Dusting brush
Handle release
2 Eureka Customer Service HELPLINE 1-800-282-2886
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts! Assemble the vacuum cleaner before using.
Washable dust cup filter
Filter cover
Exhaust filter
HF16
Hose with wand
Crevice tool
Lower cord wrap
Air path selector knob
Maintenance information
Clean as needed to maintain suction
Wash screen
Twist to unlock
cyclone assembly
from cup.
Twist and remove
collar to release
screen from cyclone.
Belt
Rinse screen and dry
THOROUGHLY;
reassemble.
Never use vacuum without all filters in place.
Empty dust cup after each use
Press button
to release bottom lid.
Debris will empty.
Replace within 6 months
Washable filter
Exhaust filter HF16
Lift latch to open cover.
Remove foam filter
from filter frame.
Rinse and dry
THOROUGHLY.
Reinstall filter.
Replace exhaust filter
and cover.Turn to lock.
Close cover
until it clicks.
BELT – Replace worn,
cut or out of shape belt
Close bottom lid
until it clicks.
www.eureka.com
Remove dust cup.
Twist filter cover
and lift off.
Snap dust cup
into place.
BRUSH ROLL
Clean monthly
Hide quick links:
Advertisement
