Table of Contents
Advertisement
3
Hardware Installation
First, use the supplied screwdriver to detach the dome cover from the camera base. Insert your
MicroSD/SDHC Card if necessary.
Tamper-proof Screw
3.1 Connecting RJ45 Ethernet Cable
RJ45 Cable Dimension
Recommended cable diameter: 5 to 8mm (Use CAT5e only)
Assembling Steps
Camera Base
Rubber Seal Plug
1. Drill a hole on the rubber seal plug and insert
1
2. Strip part of the sheath from the Ethernet
2
EN - 3
Dome Cover
Plastic Cover
an Ethernet cable through the opening.
cable.
Advertisement
Table of Contents
