Error Codes - Electrolux PW9 Operating Manual

Error codes
If the power supply to the machine should be
cut while it is working, the programmer has a
memory which stores the program at least one
minute.
The machine will restart automatically once the
1
power supply is restored.
When error code occur a new start attempt can
be made directly by activate the START-button.
Resetting the wash program and error code, in
order to choose a new wash program, can be
done by pressing the START-button min.
10 seconds.
Error code Cause/Action
01E Acknowledgement signal for water level not received within time
allowed.
02E Door status acknowledgement signal not received during program
operation.
0E Door lock acknowledgement signal not received within time
allowed.
07E Water level above parameter set for safety, during program.
10E Water level is above parameter set (10 scale units) after water
discharge.
For other error messages or repeated messages, contact service.
Error codes
1
15
224 A