Bar And Chain Combinations; Saw Chain Filing And File Gauges; 10 81-32 Rev.2 2008-01-24 - Husqvarna 445 EPA II Operator's Manual

Chain saw

Hide thumbs Also See for 445 EPA II:

Operator's manual (404 pages)

Operator's manual (88 pages)

Operator's manual (48 pages)

Table of Contents

Available languages

RECOMMENDED CUTTING EQUIPMENT FOR CANADA

The following is a list of recommended cutting equipment for Class 1A and 1B Chainsaws. The combinations of

powerhead, bar and chain meet all requirements outlined in the CSA Z62.1-95 Chainsaws and Z62.3-96 Chainsaw

Kickback standards.

The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the

corresponding maximum nose radius of a solid bar.

As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.

For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of

sprocket teeth may be considered to have equivalent kickback energy.

A hard nose bar having the same length and nose radius as a sprocket-nose bar may be considered to have equivalent

or less kickback energy than the sprocket-nose bar.

We recommend that you as replacement use the listed bars and chains or "Type C Low-Kickback Saw Chains" which

are available at your dealer.