Architect Series Custom Side Panels - KitchenAid W10681447A Installation Manual

Backer Panels
NOTES:
Dashed lines represent placement of backer panels on overlay
panels.
Illustration shows backer panels placed on decorative
overlays.
³⁄₁₆
6 "
(15.7 cm)
Top Offset
⁵⁄₈
1 " (4.13 cm)
Side Offset
¹⁄₂
70 "
(179.1 cm)
A
Bottom Offset
¹⁄₈
Model D E
36 14¹/₄" (36.20 cm) 19¹/₄" (48.90 cm) 33³/₄" (85.73 cm)
42 16³/₄" (42.55 cm) 22³/₄" (57.79 cm) 39³/₄" (100.97 cm)
48 19¹/₄" (48.90 cm) 26¹/₄" (66.68 cm) 45³/₄" (116.21 cm)
C
Side Offset
¹⁄₂
" (12.7 mm)
Bottom Offset
¹⁄₂
" (1.27 cm)
Handle-
¹⁄₄
"
(6.4 mm)
¹⁄₂
70 "
(179.1 cm)
B
" (3.2 mm)
F
Overlay Series Door Handle Kits
The following handle style is available. Contact your KitchenAid
dealer or KitchenAid Parts and Accessories at
1-800-442-9991. In Canada, call 1-800-807-6777.
A. Architect ®
Architect ® Series
Handles
Part Number Color
4396103 Stainless Steel
8171760 Biscuit
4396105 White
4396106 Black
Architect ® Series Custom Side Panels
Custom side panels may be needed when not enough space is
available to have cabinets on both sides of the refrigerator or
when the refrigerator is placed at the end of a cabinet run. You
may choose an Inset, Flush, or Recessed Inset panel installation.
Refrigerator and Side Trim Dimensions
The width and height of a side panel are determined by the type of
installation you are planning.
NOTES:
The dimensions shown are actual product dimensions and
may not reflect the needed panel installation dimensions.
The side panel should be a minimum of ½" (1.27 cm) thick
to avoid warping.
If the opening depth is 25" (63.5 cm) or more, you may
want to install a support board on rear wall.
Refrigerator
¹⁄₈
24 "
(61.3 cm)
¹¹⁄₁₆
23 "
(60.3 cm)
¹⁄₂
23 "
(59.7 cm)
A
Series handle (4396103)
13