Buick Lucerne 2011 Owner's Manual page 249

To Transfer Audio to the Bluetooth System
From a Cell Phone
During a call with the audio on the cell phone,
g
press . The audio transfers to the vehicle. If the
audio does not transfer to the vehicle, use the audio
transfer feature on the cell phone. See your cell phone
manufacturers user guide for more information.
Voice Pass-Thru
Voice pass thru allows access to the voice recognition
commands on the cell phone. See your cell phone
manufacturers user guide to see if the cell phone
supports this feature.
To access contacts stored in the cell phone:
1. Press and hold
2. Say Bluetooth. The system responds Bluetooth
ready, followed by a tone.
3. Say Voice. The system responds OK, accessing
<phone name>.
The cell phone's normal prompt messages will
go through its cycle according to the phone's
operating instructions.
g
for two seconds.
Dual Tone Multi-Frequency (DTMF)
Tones
The Bluetooth system can send numbers and the
numbers stored as name tags during a call. You can
use this feature when calling a menu driven phone
system. Account numbers can also be stored for use.
Sending a Number or Name Tag During
a Call
g
1. Press . The system responds Ready,
followed by a tone.
2. Say Dial.
3. Say the number or name tag to send.
Clearing the System
Unless information is deleted out of the in vehicle
Bluetooth system, it will be retained indefinitely. This
includes all saved name tags in the phone book and
phone pairing information. For information on how to
delete this information, see the previous sections on
Deleting a Paired Phone and Deleting Name Tags.
4-93