Adjusting The Speakers (Balance/Fade) - Buick Lucerne 2011 Owner's Manual

Hide thumbs Also See for Lucerne 2011:
Table of Contents

Advertisement

To store a station as a favorite:
1. Tune to the desired radio station.
2. Press the FAV button to display the page where to
store the station.
3. Press and hold one of the six softkeys until a beep
sounds.
4. Repeat the steps for each radio station to be
stored as a favorite.
Setting the Tone (Bass/Midrange/Treble)
BASS/MID/TREB (Bass, Midrange, or Treble): The
radio may display some or all tones such as BASS,
MID, and TREB.
To adjust the tone settings:
1. Press the
knob until the tone control tabs
display.
2. Press the softkey below the desired tab, then
turn the
knob to adjust the highlighted setting.
The highlighted setting can also be adjusted by
pressing either SEEK arrow, or by pressing
\
s
the
FWD or
The radio may be capable of adjusting bass, midrange,
or treble to the middle position by pressing the softkey
below the BASS, MID, or TREB tab for more than
two seconds. The radio beeps once and the level
adjusts to the middle position.
4-72
REV buttons.
The radio may also be capable of adjusting all tone
and speaker controls to the middle position by pressing
the
knob for more than two seconds until the radio
beeps once.
If a station's frequency is weak, or has static, decrease
the treble.
EQ (Equalization): Press this button to select preset
equalization settings.
To return to the manual mode, press the EQ button until
Manual displays or start to manually adjust the bass,
midrange, or treble by pressing the

Adjusting the Speakers (Balance/Fade)

To adjust balance or fade:
1. Press the
knob until the speaker control labels
display.
2. Press the softkey under the desired tab,
or continue pressing the
desired tab.
3. Turn the
knob to adjust the highlighted setting.
The highlighted setting can also be adjusted by
pressing either SEEK arrow.
On some radios, the
can also be used to adjust the highlighted level.
knob.
knob to highlight the
\
s
FWD and
REV buttons

Advertisement

Table of Contents
loading

Table of Contents