Pairing A Phone - Buick Lucerne 2011 Owner's Manual

Pairing Information
Up to five cell phones can be paired to the
Bluetooth system.
The pairing process is disabled when the vehicle is
moving.
Pairing only needs to be completed once, unless
the pairing information on the cell phone changes
or the cell phone is deleted from the system.
Only one paired cell phone can be connected to
the Bluetooth system at a time.
If multiple paired cell phones are within range
of the system, the system connects to the first
available paired cell phone in the order that they
were first paired to the system. To link to a different
paired phone, see Linking to a Different Phone
later in this section.

Pairing a Phone

1. Press and hold
2. Say Bluetooth.
3. Say Pair. The system responds with instructions
and a four digit PIN number. The PIN number is
used in Step 5.
4-88
g
for two seconds.
4. Start the pairing process on the cell phone that you
want to pair. For help with this process, see your
cell phone manufacturers user guide.
5. Locate the device named Your Vehicle in the list
on the cell phone. Follow the instructions on the
cell phone to enter the PIN number that was
provided in Step 3. After the PIN number is
successfully entered, the system prompts you to
provide a name for the paired cell phone. This
name will be used to indicate which phones are
paired and connected to the vehicle, see Listing
All Paired and Connected Phones later in this
section for more information.
6. Repeat Steps 1 through 5 to pair additional
phones.
Listing All Paired and Connected Phones
The system can list all cell phones paired to it. If a
paired cell phone is also connected to the vehicle,
the system responds with is connected after that
phone name.
1. Press and hold
2. Say Bluetooth.
3. Say List.
g
for two seconds.