Outside Power Mirrors; Outside Automatic Dimming Mirror; Turn Signal Indicator - Buick Lucerne 2011 Owner's Manual

3. Once the zone number displays,
press repeatedly until the correct zone
number displays. Stop pressing the button and
the mirror returns to normal operation. If CAL
appears in the compass window, the compass
may need calibration. See Compass Calibration
listed previously.

Outside Power Mirrors

To adjust the mirror:
1. Press the left or right side of the selector switch
located beneath the control pad to choose the
driver or passenger side mirror.
Controls for the outside
power mirrors are located
on the driver's door
armrest.
2. Press one of the four arrows located on the control
pad to move the mirror in the desired direction.
3. Adjust each outside mirror so that a little of the
vehicle and the area behind it can be seen.
Manually fold the mirrors inward to prevent damage
when going through an automatic car wash. To fold,
push the mirror toward the vehicle. Push the mirror
outward, to return to its original position.

Outside Automatic Dimming Mirror

If the vehicle has this feature, the driver side mirror
adjusts for the glare of headlamps behind you. This
feature is controlled by the on and off settings on the
automatic dimming rearview mirror. See Automatic
Dimming Rearview Mirror on page 3 31 for more
information.

Turn Signal Indicator

The vehicle may also have a turn signal indicator on
the mirror. An arrow on the outside rearview mirror
flashes in the direction of the turn or lane change.
See Turn and Lane-Change Signals on page 4 5 for
more information.
3-33