Using the Display
To avoid unsafe conditions, do not adjust the LCD screen while driving.
Component Parts and Features
3 4 5 6
1 POWER indicator light
This light comes on when the system
power is on.
2 Ambient light sensor
Senses ambient light. With this sys-
tem, the brightness of the LCD screen
automatically adjusts to ambient light.
3 SELECTOR button
Selects the system's audio and video
simultaneously. If AV gear is connect-
ed to the system's audio and video out-
put terminals, the audio and video of
the source selected with the SELEC-
TOR button are generated.
4 V.SEL button
Selects only the system's video.
5 SP.SEL button
Selects only the system's audio.
6 WIDE/MENU button
7 VOLUME control (∞/5) buttons
8 2/3 buttons
9 POWER button
0 Built-in speaker
! This part is for future use.
Display rear side
Changes the method of enlarging 4:3
video to 16:9 video. Pressing these
buttons for 2 seconds or longer displays
the setup menu. Once the setup menu
is displayed, its image is switched each
time the buttons are pressed.
Adjust the volume of the built-in
speaker 0, or change setup items when
the setup menu is displayed.
Never set the volume so high that you
cannot hear outside traffic and emer-
Adjust the item when the setup menu is
Turns the system on or off.
Plays audio from a VCR.