Setting the Display Mouting Location
If this product is installed in a place where it is visible to the vehicle's driver, you MUST
always set the [DISPLAY SETTING] to the [FRONT] setting. Failure to do so could
result in distracting images being potentially visible to the driver while the vehicle is in
If this product is installed in a place where it is not visible to the vehicle's driver, then you
may choose the [REAR] location setting.
Use of this product is subject to any local laws regarding placement or use.
PIONEER Corporation cannot accept any liability for any problems, damage or loss
incurred as a result of the product being used with an incorrect setting or in violation of
any local laws.