Displaying The Frequency, Power, And Current Data - HP R12000 XR Maintenance And Service Manual

Displaying the Frequency, Power, and Current Data

Select Meters on the Main Menu to view the frequency, power, and current information for
either the main module or any of the other electronics modules.
This submenu provides information on virtual meters that monitor the UPS voltages. Scroll
up and down through the menu using the Center button. If the words continue off the screen,
scroll right and left to read the message. Press the Enter button to view selections. Table 3-5
lists the options under the Meters menu.
Table 3-5: Main Module and Electronics Modules M1-M4 Meter Options
Input Frequency
Output Frequency
│❚❚❚❚❚❚❚❚❚❚│❚❚ MM or Mx
│❚❚❚❚❚❚----│-- MM or Mx
HP UPS R12000 XR Models Maintenance and Service Guide
HP CONFIDENTIAL Codename: Sierra Part Number: 221273-001 Last Saved On: 7/31/02 8:58 AM
Main Menu
Meters
LCD Display Explanation
Input Volts The utility voltage
Output Volts The voltage available at the UPS output receptacles
The utility frequency in Hertz
The frequency in Hertz available at the UPS output
receptacles
Output Power The output power as shown in a bar graph. This example
shows 120% load (overload). There are ten squares in
front of the 100% line. Each represents a 10% load. The
two squares past the line each represent 10% of overload
(20% overload in all).
In contrast, this display shows a 60% load.
Battery Volts The battery voltage
Input Current The input current
Identifying Components
3-15