Table of Contents
Advertisement
•
Soldering of tin, special silver
solder, SMD elements, cable
lugs, and for loosening soldered
connections.
•
Paint removal. Removal of old
coatings of oil paint, varnish, and
synthetic plaster.
•
Drying of color shade samples,
filter, adhesives, construction joints
and stucco forms.
•
Joining adhesives. Large surface
gluing with contact adhesives,
activation of pressure, or heat
sensitive adhesives, acceleration
of bonding processes, releasing of
bonding points as well as releasing
or bonding of edge bond or veneer.
•
Defrosting of icy stairs and steps,
door locks, trunk lids, car doors or
water pipes.
•
Disinfection. With the tool set at the
highest setting, animal sites/stables
may be disinfected. Wood worm
infestation may be controlled. Do
not heat up the wood surface too
much or it can burn.
gun; it could burn or ignite.
5.
When the job is finished, push the
"POWER" button to turn the unit off
and allow the Heat Gun to cool down
on a insulate, non-flammable surface.
6.
Disconnect its power supply after
use. Clean, then store the tool
indoors out of children's reach.
SKU 66001
For technical questions, please call 1-800-444-3353.
never touch work
area with the Heat
Page 10
Advertisement
Table of Contents
