Table of Contents
Advertisement
b.
avoid body contact with grounded
surfaces such as pipes, radiators,
ranges and refrigerators. There is
an increased risk of electric shock if
your body is grounded.
do not expose power tools to rain
c.
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
d.
do not abuse the cord. never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk
of electric shock.
e.
When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f.
if operating a power tool in a damp
location is unavoidable, use a
ground Fault circuit interrupter
(gFci) protected supply. Use of
a GFCI reduces the risk of electric
shock.
3.
personal safety
a.
Stay alert, watch what you are
doing and use common sense
when operating a power tool. do
not use a power tool while you
are tired or under the influence of
drugs, alcohol or medication. A
moment of inattention while operating
power tools may result in serious
personal injury.
b.
use safety equipment. always
wear eye protection. Safety
equipment such as dust mask,
non-skid safety shoes, hard hat,
or hearing protection used for
SKU 66001
For technical questions, please call 1-800-444-3353.
appropriate conditions will reduce
personal injuries.
prevent unintentional starting.
c.
ensure the switch is in the off-
position before connecting to
power source picking up or
carrying the tool. Carrying power
tools with your finger on the switch or
energizing power tools that have the
switch on invites accidents.
d.
do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
4.
power tool use and care
a.
do not force the power tool. use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b.
do not use the power tool if the
switch does not turn it on and
off. Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
c.
disconnect the plug from the
power source and/or the battery
pack from the power tool before
making any adjustments, changing
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
d.
Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
e.
Maintain power tools. check
for misalignment or binding of
Page 3
Advertisement
Table of Contents
