Bluetooth Settings - Kenwood KMR-440U Instruction Manual

60MIN: Turns the power OFF after 60 minutes.
Function of the KDC-BT50U/ KDC-5047U.
Built in AUX: "Built-in AUX"
41
Sets whether to display AUX during source
selection.
CD Read: "CD Read"
42
Sets the method for reading CD.
When unable to play special format CD, set this
function to "2" to force playing. Note that some
music CDs may be unplayable even when set to
"2".
In addition, audio files cannot be played when set
to "2". Normally, keep this set to "1".
1 : Automatically distinguishes between audio file
disc and music CD when playing disc.
2 : Forces playing as music CD.
Favorite Delete: "Favorite Delete"
43
"All"
Deletes Favorite Preset Memory.
Refer to <Deleting Favorite Preset Memory>
(page 15).
Built in Amp setting:
44
"OFF"
Selecting "OFF" turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
Speaker Select: "Speaker Select"
45
"5/4inch", "6x9/6inch", "O.E.M"
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
Firmware Upgrade:
46
"CD"
Upgrades the firmware.
Selecting "YES" and then pressing [ENTER] button
starts upgrading the firmware.
For how to update the firmware, access our web
site.
http://www.kenwood.com/cs/ce/
Demo Mode Settings
Demo Mode: "DEMO Mode"
47
Specifies whether to enable demonstration.
➤ "ON", "OFF"
➤ "1", "2"
➤ Preset No.,
"Built-in AMP" ➤ "ON",
➤ "OFF",
Display
"OFF"
"5/4inch"
"6x9/6inch"
"O.E.M"
"F/W Update #.##" ➤ "USB",
➤ "ON", "OFF"
Autogood products Internet store "130"
Function of KDC-BT50U/ KCA-BT200 (Optional
Accessory)

Bluetooth Settings

Phone Selection: "Phone Selection"
48
Select a cell-phone subject to hands-free
connection. Refer to
device You Wish to Connect> (page
Audio Selection: "Audio Selection"
49
Select the Bluetooth audio player to be
connected. Refer to <Selecting the Bluetooth
device You Wish to Connect> (page
SMS Download: "SMS Download"
50
Download a short message. Refer to
<Downloading the SMS> (page
SMS Inbox display: "SMS Inbox"
51
Display the received short message. Refer to
<Displaying the SMS> (page
Function of KCA-BT200 (Optional Accessory).
Adding a voice command:
52
Registers voice for voice recognition. Refer to
<Adding a voice dialing command> (page
Function of KCA-BT200 (Optional Accessory).
Voice command category setting:
53
Edit"
Registers voice to select the Phone number
category in Phonebook. Refer to
Command for Category> (page
Function of KCA-BT200 (Optional Accessory).
Device Regist: "Device Regist."
54
Register a Bluetooth device (pairing). Refer to
<Registering Bluetooth device> (page
Special Device Regist:
55
Allow registration of a special device that cannot
be registered normally. Refer to
Special Bluetooth device> (page
Device Delete: "Device Delete"
56
Cancel registration of the Bluetooth device. Refer
to <Deleting a Registered Bluetooth device>
(page 30).
PIN Code Edit: "PIN Code Edit"
57
Specify the PIN code required when registering
this unit using the Bluetooth device. Refer to
<Registering PIN Code> (page
<Selecting the Bluetooth
30).
30).
33).
33).
"PB Name Edit"
31).
"PN Type
<Setting a Voice
32).
28).
"SPCL DVC Select"
<Registering
28).
29).
|
English
19