Advertisement
Standalone Control Screen
For operation without DMX or Art-Net in a standalone setting. Use
this screen to adjust the intensity and in some fixture models the
CCT value. Powering off the fixture from this screen will save the
last fixture settings including intensity and color.
TrueSource Screen
This screen displays the CIE value of the color of the light being
produced by the fixture. The screen shows both the target and actual
color value in X,Y coordinate values to assure TrueSource active
color calibration is active and monitoring performance.
Yoke Bolt – Detaches
yoke from housing
Yoke Slide – Loosen hex
screws to adjust position
RevEAL Studio3 User Manual – April 2013 - Prism Projection, Inc.
Advertisement
