Advertisement
Modes and DMX Channels
Operating modes are set by using the button pad to navigate to the Personality and Fixture Address Menus. The
menu allows the user to adjust; Color Mode, Color Temperature, Intensity (dimmer curve) and select Advanced
Features such as power control. Remote power setting permits the user to control ECO and FULL power setting
via DMX.
NOTE: If the advanced feature power mode is set to REMOTE the first DMX channel on the instrument will be
assigned to it and all the channels listed below will be shifted up by one channel.
Color Modes
RevEAL Profile Junior offers a calibrated color mode and the option to only use white (CCT). Use the up and
down buttons to select "Color" then use the left and right buttons to choose between no color and XY mode.
While RevEAL instruments contain 5 base colors of LEDs, they are controlled within calibrated color systems.
This ensures that the TrueSource optical sensor is actively monitoring and calibrates color.
Color Mode - CIE x,y
CIE x,y allows the user to select color from the CIE 1931 2° Observer color space.
To determine the DMX decimal values for a given coordinate, simply multiply the coordinate by 255. For
example 3200K white light has an x value of 0.4254 and a y of 0.4044.
x value: 0.4254 x 255 = 108 (42%)
y value: 0.4044 x 255 = 103 (40%)
In 16 bit mode, the multiplier is 65535;
x value: 0.4254 x 65535 = 27878 (42%)
y value: 0.4044 x 65535 = 26502 (40%)
If the Color Temperature channel is enabled, the color temperature channel will "take over" color control from the color
channels. Generating white light in the Kelvin value specified by the Color Temperature channel.
CIE x,y DMX Map (8 bit control):
1st Color Channel
2nd Color Channel
x coordinate
CIE x,y DMX Map (16 bit control):
1st Color Channel
2nd Color Channel
x course
White (CCT)
Available Options: Enabled, Disabled, Correction
When enabled the White setting creates a Correlated Color Temperature (CCT)Channel. If the CCT channel is
at any value other than 0, white colors will be produced by the instrument. At full the color generated will be
8000K white, at 11% the color generated will be ~3200K white. As the channel value is raised the color
temperature will go up.
y coordinate
3rd Color Channel
x fine
y course
4th Color Channel
y fine
11
Advertisement
