Table of Contents
Advertisement
Web Browser Settings
By default, your Web Browser (eg. Microsoft Internet Explorer, Netscape) does not need any
setup to use the Router. The default settings would allow you to surf the web using the Router.
Never Dial a Connection
The Web Browser is tied to a particular device for accessing the Internet. This is the reason why
you have to configure it if you had used another networking device previously. The steps are
described for IE6, but the procedure is similar for other Web Browsers.
1.
Go to Tools >> Internet Options >> Connections.
2.
As seen in the above, the Browser has a Dial-up Connection configured previously.
Choose "Never dial a connection" and Apply. The Browser will now use your LAN
connection (Ethernet or WLAN) to access the Internet instead of the old device.
Page 52 of 54
Advertisement
Table of Contents
