Table of Contents
Advertisement
Static WAN
You can choose to manually set all the fields if your MOBI or network provides you with the IP
address, network mask, gateway and DNS. Do take note that the IP addresses in each field must
be of the appropriate format (xxx.xxx.xxx.xxx). The Router will not accept the IP address if it is not
in the correct format.
Basic > MAC CLONE
The default WAN MAC address is set to the WAN's physical interface MAC address on the
Router. You can use the MAC Clone function to replace the default MAC address to that of the
Ethernet Card installed by your MOBI. It is not recommended that you change the default MAC
address unless required by your MOBI.
Enable MAC Clone: Tick to enable MAC Clone function.
MAC Address: Enter the MAC address you wish to clone or use the default MAC by clicking on
the Use Default MAC button.
Your PC MAC Address: This field reflects the MAC address of your computer. In order to use
this function, you would need to tick on Disable Web access from WAN in Firewall > Advance.
Page 25 of 54
Advertisement
Table of Contents
