Table of Contents
Advertisement
PPPoE Type
Select this option for MOBI PPPoE connection.
IP Address: This displays the IP of your WAN as given by MOBI server.
Network Mask: This displays the network mask of your WAN as given by MOBI server.
Gateway Address: This displays the gateway address of your WAN as given by MOBI server.
DNS Server: This displays the IP address of the DNS server as given by the MOBI server. You
can manually set the DNS server if MOBI provides you with the IP address of the DNS server.
Secondary DNS: This displays the IP address of the secondary DNS server as given by the MOBI
server also. You can manually set the secondary DNS server if MOBI provides you with the
IP address of the secondary DNS server.
Username: Enter the username given by MOBI.
Password: Enter the password given by your MOBI.
MTU: Maximum Transmission Unit indicates that packets larger than this size will be fragmented
before the transmission. Enter an MTU value only if required by MOBI. Otherwise, leave it as the
default setting.
Manual: You will only be connected or disconnect to the Internet when you click on the Connect
and Disconnect button.
Always on: The Router will auto-connect with the MOBI when it restarts or when the PPPoE
connection is dropped.
Connect on Demand: Router will auto-connect to MOBI when user launches any program that
requires Internet connection on his PC.
Idle Time before auto-disconnect: You can set the Router in such a way that it will disconnect
after a certain period of inactivity. The time can be set in this field.
Page 24 of 54
Advertisement
Table of Contents
