Table of Contents
Advertisement
FTP enable: going to or coming from the LAN's PC hosting the FTP Server.
SIP enable: SIP (Session Initiation Protocol) is an application-layer control protocol that can
establish, modify, and terminate multimedia sessions such as Internet telephony calls (VoIP),
video, chat, gaming, and virtual reality. Un-checking this feature will prevent such multimedia
events from reaching the LAN's PCs.
VPN Pass Through: The feature will enable transmitting packets with one of two VPN security
protocol i.e. IPSec and PPTP, so that LAN PC can access WAN pc through VPN . For IPSec,
some newer version of ipsec tools has NAT passthrough capability, user no need to enable this
option.
Enable Modem Access: this feature is access the modem configuration which is IP
192.168.250.55, to checking the MOBI signal strength.
Firewall > MAC Filter
This page allows you to specify which computer can access the Internet and which computer
cannot access the Internet. The specified MAC address and the policy for the computer is
reflected in the table.
Enable Ethernet MAC Control: Tick to enable Ethernet MAC Control.
Default Policy: This policy determines whether computers, whose MAC addresses are not in the
table, are able to access the Internet. If you choose Deny All, all computer connected to the
Router will not be able to access the Internet other than those specified in the table.
MAC Address: Enter the MAC address of the computer. The format for the MAC address is
aa:bb:cc:dd:ee:ff.
Policy: Choose to deny or allow the computer to access the computer. Click on the Add button to
add the policy.
Page 34 of 54
Advertisement
Table of Contents
