Table of Contents
Advertisement
Open-System/Shared Key
Open-System: When chosen, the Key is not used for authentication. It is only used for
encryption. Open-System uses Static Keys for encryption. Static (Shared) Keys are never
changed, and a hacker can crack the key after a period of time.
Shared-Key: When chosen, the encryption Key is also used for authentication between the
Router and Client. Note that this system is also using Static Keys.
Key Entry Method: Choose HEX if you want to enter the Keys in hexadecimal format. Otherwise,
enter in ASCII format. ASCII is also called Alphanumeric in some systems. Use the same key
format for the Router and Client!
Key 1-4: The Key is to be entered in the boxes. The SAME Key must be entered in both the
Router and Client. Take note that there is a different Key length for a different number of
encryption bits. 152 bits is the most secure, but make sure that your Client card supports it. The
last point to take note is that if you use Key 4 on the Router, you must also use Key 4 on the
Client, for example. The same logic applies for Keys 1-3.
WPA-PSK
Page 27 of 54
Advertisement
Table of Contents
