Table of Contents
Advertisement
5019_711_02001_IFU_GB
Wine drawer description
1. On/Off switch
2. Wine drawer On light
3. Thermostat
Note: Take particular care not to damage the control panel when opening/closing the drawer loaded with
bottles of wine.
This wine drawer uses a "No-Frost" system, and therefore does not require manual defrosting.
The appliance also has an internal air circulation system which ensures an almost homogeneous
temperature inside the drawer.
The bottles must be arranged in the special places inside the drawer.
Optimum performance is obtained at temperatures between +16°C and +32°C.
1 Switching on
• Connect the wine drawer to the power supply.
• Open the drawer and press the wine drawer On button (1).
• Adjust the temperature by turning the knob (3) from position 1 (least cold) to 4, 5 (coldest).
2 Use
• Temperature adjustment.
• To ensure correct operation and optimum wine storage, adjust the temperature by means of the
thermostat knob (3).
• After switching on, the wine drawer takes a few hours to reach the required temperature for storing
wine.
Notes:
• To ensure free air circulation, the space between the rear wall of the drawer and the bottom of the
wine drawer must be not be obstructed.
• Store wine in closed containers.
• The possible formation of condensate does not affect correct wine drawer operation.
• Defrosting is completely automatic.
23-05-2007
14:24
Pagina 8
8
Advertisement
Table of Contents
