Connections
Figure 2: Rear panel of camera
1. Power LED.
2. Reset button.
Press to reset camera to factory default
settings.
3. Ethernet RJ45 port.
Connect to network devices.
4. DIP switches.
Configure camera settings.
Alarm connection
Figure 3: DC alarm input and output wiring
1. OUT
Table 2: Description of alarm connections
Alarm input
Type
Connector type
UltraView IP Box Day/Night Range Camera User Manual
2. GND
TTL. Compliant with 48 V input voltage.
Screw terminal
5. Alarm input and output.
Connect to be able to trigger an alarm at
the network device.
6. Power supply.
Connect 12 VDC or 24 VDC power supply.
7. Video output.
Connect to a CCTV monitor
3. IN
4. GND
7